Let’s say the chain of your chainsaw broke and you are out here looking for a new one you can use as a replacement. You’ll probably ask yourself, can I use a Stihl chain on a Husqvarna saw?
No, you can’t use a Stihl chain on a Husqvarna saw because of the differences in the pitch sizes and gauges of both tools. Therefore, it is highly recommended to use a compatible chain only.
Moreover, if you use a chain of a different brand then you can face a lot of issues such as:
- The chain might not fit perfectly which can cause it to come off while you are working.
- Different brands can also result in the saw being less effective and not performing as well.
Let’s take dig deep and see whether using a Stihl chain on a Husqvarna saw is a good idea or not. I am sure after reading this article you will be able to make a better decision.
Can I Use a Stihl Chain on a Husqvarna Saw? (Difference Between Both Chains)
If you have a Stihl saw, then you should use a Stihl chain. If you have a Husqvarna saw, then you should use a Husqvarna chain.
It is not recommended to use a Stihl chain on a Husqvarna saw or vice versa because of the differences in the pitch sizes. If you use a chain of a different brand, then you might face issues.
Stihl chains are available in three different pitch sizes including 3/8-inch, 0.325 inches, or 0.404 inches. Whereas Husqvarna uses a 3/8-inch or 0.325-inch pitch.
The chain gauge of Stihl is 50 while Husqvarna uses 52 which makes them slightly different from each other. Now, most of you might be thinking there is no big difference which is true.
You won’t get any problem during the usage but the issue will arise after the usage. Furthermore, Husqvarna uses a slightly different drive link design and cutting depth than the Stihl.
This can lead to problems such as tension and vibration which can be dangerous for the tool and the user.
Are Chainsaw Chain Brands Interchangeable?
There is nothing wrong with the brands of the chains however, the problem is with the compatibility of the chain.
You can interchange the chainsaw chain brands as long as its specification matches the requirements of your tool.
I would highly recommend avoiding using chains that are too tight or too loose because it is not only harmful to the saw but for you as well. Chainsaws are extremely powerful and dangerous tools and I hope everyone knows them from the horror movies.
With a slight bit of a mistake, you can easily cut your hand and injure yourself seriously; therefore, never do experiments on it unless you know what you are doing.
Are .325 and 3/8 chains interchangeable?
3/8 and .325 are two different types of chains. 3/8 is a standard size while .325 is a low kickback chain.
It is not recommended to use a .325 chain on a 3/8 saw as it will cause the chain to come off. Similarly, using a 3/8 chain on a .325 saw will also result in tension and vibration.
The only time you can use a .325 chain on a 3/8 saw is when you are using a conversion kit. Otherwise, it is not advisable to do so.
Will a Oregon chain fit a Husqvarna?
Yes, an Oregon chain will fit a Husqvarna. However, you need to make sure that the chain is compatible with your Husqvarna model and has the same specifications.
Incompatible chains can lead to serious problems during the usage and might even damage your saw. So, always buy a compatible chain for your chainsaw.
There are some Oregon chains, such as the M72, can perfectly fit not only the Husqvarna not other brands as well. However, I would still recommend you double-check the compatibility of the chain first before mounting it on the saw.
Will a Stihl chain fit a Poulan saw?
Poulan saws are also quite famous and are used by a lot of people all over the world. If you have a Poulan saw and are looking for a chain but you can’t find one then you can use the Stihl chain on it.
The Stihl chain can fit Poulan saw provided that the gauge and pitch size is compatible with your Poulan model. Different saws have different requirements and that is why it is important to check the compatibility of the chain before using it.
Incompatible chains can cause a lot of problems during the usage and might even damage your saw. So, always make sure that the Stihl chain you are going to use is
As I said earlier, different models have different specifications so it is quite important to do your research first before making any purchase.
Moreover, always keep a few things in mind such as the gauge and pitch size of the chain. These are the two most important factors that you need to consider while buying a chain for your saw.
Things to Look Out for When Using Different Chainsaw Chain Brands
Ok, so far you’ve learned that you shouldn’t use a Stihl chain on a Husqvarna chainsaw unless and until you are a professional with years of chainsaw experience.
Besides that, if you are a beginner and you don’t have a wide range of choices out there then here are a few things that you must keep in mind while using different chainsaw chain brands:
- The gauge and pitch size of the chain must be compatible with your saw.
- Different models have different requirements so always check the compatibility of the chain before using it.
- Incompatible chains can cause a lot of problems during the usage and might even damage your saw. So, always make sure that the chain you are going to use is compatible with your model.
- The length of the chain is also an important factor that you need to consider. Always buy a chain that is long enough to fit your saw.
- Chains that are too long or too short can cause a lot of problems during the usage and might even damage your saw.
- If you are using a different brand of chain then make sure to read the instruction manual carefully before using it. Different brands have different ways of installation and usage.
- Always follow the instructions given in the manual to avoid any kind of accidents or damage to your saw.
I found one of the most interesting questions on different forums asked by many beginners i.e. Can I Use a Stihl Chain on a Husqvarna Saw? So I tried to answer it in a simple way to help people who are new to chainsaws.
To conclude, I would say that you can use a Stihl chain on a Husqvarna saw but only if you are a professional with years of experience. Otherwise, it is not advisable to do so.
Chains that are not compatible may cause several difficulties during operation, and they might even harm your saw. As a result, always obtain a chain that is appropriate for your chainsaw.
Apart from that, not every chain might fit your saw because of the differences in the pitch and the gauge size therefore, you need to keep an eye out for this too.
I hope you find this article helpful and informative. If you still have some questions on your mind please feel free to ask them using the comment section below. Also, don’t forget to leave feedback as it helps me improve my content.
- Chainsaw know how-part 2
- Analysis of residual stresses on guide bar of chainsaw
- Operating Instructions
- EXPERIMENTAL RESEARCH OF HAND–ARM VIBRATION EMISSION OF CHAINSAW
- Impact of the selected factors on the cutting force when using a chainsaw